INDUSTRY EQUIVALENT MODELS:
The PanBlast™ Corsa II Abrasive Control Valve has been developed from the Series I valve, to provide even greater reliability and efficiency.
The PanBlast™ Series II Corsa Valve is a normally closed abrasive metering valve requiring a pilot compressed air signal to open it, which then permits abrasive flow. The Series II Corsa Valve may be used on both pressure hold and pressure release blast pots.
When used on pressure hold, multiple outlet pots, the Corsa II Valve permits each operator to blast totally independent of each other. When used with pressure release blast pots, the Corsa II Valve prevents the blast hose filling with abrasive each time the pot is depressurized.
Posted by Unknown on 30th Dec 2011
Blastmaster sells the Axxiom/Schmidt Thompson II valves here in Australia at double the price, so I decided to give these a try. This valve does the same job with the quad seals and solid carbide plunger which prevent fine garnet ingress into the piston chamber which used to cause seizure in the original Thomson valve. While this valve looks externally similar, it performs completely different and is functionally similar to the Thompson II valve. These will be standard fit for our big bulkas from now.
Choose a currency below to display product prices in the selected currency.